NVITE | installation guide
4/40
1
Introduction
1.1
NVITE
NVITE is a multiple technology reader that reads contactless smartcards, low frequency proximity cards, 1D and 2D
(QR) barcodes and supports Bluetooth Low Energy (BLE) and Near Field Communication (NFC).
NVITE can be used in combination with any parking, access control or logistics management system that requires the
swift identification.
Identification is depending on the user-enabled technologies: presenting a card, scanning a barcode or activating a
smartphone credential.
Please remember to fill out the ‘How to Order Guide’ to prepare your NVITE reader installation.
1.2
Firmware versions
The NVITE reader supports different firmware versions.
Below an overview of the available firmware versions and their key features.
STANDARD firmware:
•
RS485 communication using CR/LF protocol.
•
Wiegand communication output.
•
Magstripe (clock & data) communication output.
•
LED and buzzer control automatic or remote through digital inputs.
OSDP firmware:
•
RS485 communication according to the SIA OSDP v2.1.7 standard.
•
Secure Channel Protocol supported.
•
LED and buzzer control through OSDP commands.
•
General purpose inputs (3x) and outputs (2x).
Default the STANDARD firmware is installed.
OSDP (Open Supervised Device Protocol) is an access control communications standard developed by the Security
Industry Association (SIA). The OSDP protocol specification can be obtained from the website;
www.securityindustry.org/industry-standards/open-supervised-device-protocol
