NED NUCLi7370AT6 User Manual Download Page 6

Page: 6 / 61

NED

NUCLi7370AT6

UME-0069-03

Exclusion of Liability for Compensation for Missed Opportunities



Regardless of whether within the warranty period or not, our warranty does not cover

compensation for missed opport

unities for our customers, or our customers’

customers, caused by a fault of our products, nor for damage to products other than

our own, or related business.

Note about Product Usage



This product has been designed and manufactured as a general-purpose product for

general industry. In applications expected to be life-critical or safety-critical, the

installer or user is requested to install double or triple failsafe systems.

Repair Service Outline



The cost of dispatching engineers etc. for repair service is not included in the price of

purchased and supplied goods. On request, arrangements can be made separately.

Scope of Repair Service



The above assumes business dealings and usage to take place in the customer’s

region / country. In cases of business dea

lings and/or usage outside the customer’s

region/country, separate consultation is required.

Summary of Contents for NUCLi7370AT6






























































Search results

Summary of Contents for NUCLi7370AT6

Reviews:

Related manuals for NUCLi7370AT6

Brands by name

Popular brands

NED NUCLi7370AT6, User Manual

Search results

Summary of Contents for NUCLi7370AT6

Reviews:

Related manuals for NUCLi7370AT6

Brands by name

Popular brands