background image

 

 

WARRANTY 

Pecan Engineering Pty. Ltd. warrants this stove to be able to operate under normal use and service and within 10 years 
from the date of the original purchase on the terms herein shall repair or replace without cost to the original customer 
any part thereof which shall be returned to our factory, transportation charges prepaid and which our inspection shows 
would prevent operation.  

This warranty does not apply to firebricks, brick retainer, baffle, door seal, glass, nor discolouration of the surface or 
tarnishing of chrome fittings all of which require normal service to maintain them. 

Under the terms of this warranty, Pecan Engineering Pty. Ltd. assumes no responsibility for the labour costs involved in        
removing or replacing the stove. Nor shall Pecan Engineering Pty. Ltd. be liable for any injury, loss, or damage (direct, 
indirect or consequential) arising out of the use or inability to use the product, or its removal and replacement. All other 
stove warranties, expressed or implied are excluded to the extent possible to law. Any claims against Pecan Engineering 
Pty. Ltd. must be brought within Australian Jurisdiction. 

 

The Retailer does not have the authority to alter this warranty.

 

 

 

 

 

MANUFACTURER NAME & ADDRESS: 

Pecan Engineering Pty. Ltd. 

13 Acorn Road 

Dry Creek 

South Australia, 5094 

Phone: +61 8 8349 8332

 

 

 

Summary of Contents for 15 LE









Reviews: