7
PHOTOVOLTAIC HEAT CONTROLER PVHC – 2.01
USER MENU
When starting up your Nectar Sun for the first time, various setup settings must be selected.
To switch on the device you need to
To set up your Nectar Sun you need to do the following:
To set up a time.
Note: after this step your Nectar Sun is starting to work. If you want to set up an additional
information proceed with following:
To control and set up please choose :
if you want to connect the device with internet via wifi and control it with Nectar Sun app. For
further instructions please see: “How to connect wifi and control via app”;
if you want to control the device manually.
For further instructions please see: “How to
control manually”
.
Note: 30 min. after switching on the device your Nectar Sun is ready to be connected to wifi.
If you want to pair the device with wifi later, please go to the section „Settings. Pair with wifi“.
If setup is stopped before it is completed, it can be started again via reset.