D
EEP CLEANING
1
2
Removing and sanitising the mixer:
• Detach tube (
D
) from mixer.
• Rotate the product dispensing nozzle (
A
) upwards.
• Rotate the lever (
C
) anticlockwise.
• Take hold of the mixer assembly (
B
) firmly, and pull.
Removing and sanitising the mixer:
• Separate all the mixer assembly components: product funnel (
A
),
powder deposit drawer (
B
), mixing bowl (
C
).
3
4
Removing and sanitising the mixer:
• To remove mixer impellers, use a finger to hold the cogged disk
fitted on the mixer shaft below the mixer chamber.
• Unscrew the impeller.
• Thoroughly wash, rinse and dry all of the removed components.
• Reassemble the impeller.
Reassemble the mixer:
• Reassemble all the mixer (
B
) components.
• Rotate the lever ring (
C
) clockwise to lock the mixer onto the dis-
penser.
• Rotate the product dispensing nozzle (
A
) back down again.
• Connect the tube (
D
) to the mixing bowl.
5
6
Cleaning the dispensing spouts:
• Detach the tubes (
A
) from the dispensing spouts.
• Press pushbutton (
B
) to release the dispensing spouts carrier
plate (
C
).
• Detach the dispensing spouts (
D
) from spout holder (
C
).
• Thoroughly wash and dry all the relative components.
Assembling of the dispensing spouts carrier plate:
• Insert the dispensing spout holder (
A
) into guide (
B
) and press
until it clicks.
• Reinsert the dispensing spouts onto the spout holder and connect
the tubes onto their spouts.
KORINTO ESPRESSO
B
A
B
D
A
C
A
B
C
D
A
B
C
A
B
C
D
