Necta Kobalto, Programming Manual

Page: 35 / 50

P285U00 05 - 2007
TECHNICIAN MENU
31
2.6.3.8 - TEST SEl. PWD
2.6.3.9 - FIlTER RESET PWD
2.6.3.A - WASTE RESET PWD
2.6.4 - ENABlE FIll MENU
2.6.5 - ES UNIT
2.6.6 - AUT. UNIT WASH
2.6.3.8
t
eSt SelectIon paSSWord
This function is used for setting the password to access the
“Programming menu” mode and therefore also the test selections
made from the outside.
2.6.3.9
f
Ilter reSet paSSWord
This function is used for setting the password required for resetting
the message “Replace water filter” with the door closed and reset -
ting the counter after replacing the filter.
2.6.3.
a
W
aSte tray reSet paSSWorD
This function is used for setting the password for resetting the se-
lection counters of the machine lock function for “Waste tray full”
2.6.4
e
nablIng the
f
Iller menu
This function is used for determining which of the “Filler menu”
functions are to be left active and which are to be disabled. The
reference numbers of the menus do not change even if some are
disabled.
2.6.5
e
SpreSSo unIt
This function is used for setting the standby position of the Z3000
espresso unit.
- OPEN brewing chamber open;
- CLOSED brewing chamber closed.
By default the position is set to OPEN.
2.6.6
a
utomatIc unIt WaSh
This function is used for setting the daily unit wash of the espresso
unit by setting the time when it is to be performed. If setting the
time to 00.00 the function is disabled.