P250U00
11-2005
Technician Menu
2.2.2 SET POWDER
2. SET PARAMETERS
2.2.2.1 POWDER DOSES
2.2.2.2 DOSER SETTING
2.2.3.1 ENABLE CUP
2.2.3.3 ENABLE STIRRER
2.2.3.2 ENABLE SUGAR
2.2.4 SELECTION STATUS
2.2.6 SEL. ARRANGEMENT
2.2.7 SET PROD. CODE
2.2.2 Setting the powders
2.2.2.1 Powder doses
The powder dose, expressed in grams, can be set for each selec-
tion button and therefore each product assigned to it; the dis-
play indicates the name of the product being selected.
2.2.2.2 Setting the doser units
This function is used for setting the flow rate of the single
doser units, expressed in g/s, to calculate the amount of
powder to be dispensed, for correct conversion of product
dose values.
2.2.3 Setting the accessories
2.2.3.1 Enabling the cup
This function is used for enabling or disabling cup dispensing for
each selection button.
2.2.3.2 Enabling the sugar
This function is used for enabling or disabling sugar dispensing
for each selection button.
2.2.3.3 Enabling the stirrer
This function is used for enabling or disabling stirrer dispensing
for each selection button.
2.2.4 Selection status
Each single selection button can either be enabled or disabled.
2.2.5 Button <—> Selection
This function permits the association of a selection number, indi-
cated in the selection dose table, to a button in the direct selec-
tion keypad.
2.2.6 Selection position
This function is used for verifying to which selection the
button that has just been pressed is assigned.
2.2.7 Product code
This function is used for assigning a 4-digit code to each selec-
tion for processing the statistics.
2.2.3 SET ACCESSORIES
2.2.5 SELECTION <-> BUTTON
