background image

PERMANENT WATER DRAINAGE

It is possible to connect a drainage tube (not supplied) to the unit for permanent water drainage.
If this option is desired, you will need to purchase a suitable tube from your local hardware retailer. 
(Necessities does not hold tubes as spare parts). 
Connect the drainage hose to the drain spout.  Ensure that the end of the hose is lower than the drain 
opening, otherwise the water will not drain and flooding may occur. 
Also ensure the water tank is in position (in the unit) otherwise the continuous drainage will not 
operate.
Place the end of the drainage hose in a drainage outlet. 
When you no longer wish to use the permanent water drainage, disconnect the drainage tube from the 
device.

CLEANING AND MAINTENANCE

Unplug the Dehumidifier from the mains supply before cleaning. 
Ensure that the Dehumidifier has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the Dehumidifier to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Never use solutions such as benzene, thinners or polishing agents. 
Ensure the Dehumidifier is dry before plugging back into the mains supply.

Do not attempt to dismantle the Dehumidifier. There are no user serviceable parts. For service or 
repair, contact an authorised electrical service technician.

THE AIR FILTER

Unplug the Dehumidifier from the mains supply.
Remove the filter. Clean the filter with a vacuum or with water. Dry the filter.
Ensure the filter is completely dry before placing back in the unit.

Never use the Dehumidifier without the air filter.

STORAGE

To store the unit, remove the plug from the socket and empty the water container. Allow the container
and the Dehumidifier to dry completely. Clean the air filter. Store the device in a dust-free location,
preferably covered with a sheet of plastic.

IMPORTANT! NEVER COVER THIS DEHUMIDIFIER!

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase.

TECHNICAL SPECIFICATIONS

Model: TWDH110

Supply: 220-240VAC 50Hz

Wattage: 245W

Unit Capacity: 10.0L/day max (30°C/80%RH)

Tank Capacity: 2L

Refrigerant: R134a/145g

SUPPORT AND TECHNICAL ADVICE

North Shore City, Auckland, New Zealand

Monday 

– Friday 8am-5pm

Phone: 0800 232 633

Summary of Contents for TWDH110









Reviews: