manualshive.com logo in svg

Necchi Q132A, Instruction Manual, Page: 42 / 60

Share
Download
Necchi Q132A Instruction Manual Download Page 42

36

Button sewing

Buttons can be sewn on with the sewing machine. Buttons with 2 or 4 holes can be 
attached.

Using the button sewing foot.

For buttons with 4 holes, sew through the 

IURQWWZRKROHV¿UVWSXVKZRUNIRUZDUGDQG

then sew through the back two holes.

Put the work under the foot and place the 
button in desired position, then lower the foot.

Select the straight stitch and sew a few 
securing stitches.

Machine model without width dial: Select the 
zig-zag stitch width according to the distance 
between the two holes of the button.

Machine model with width dial: Select the 
zig-zag stitch and adjust the stitch width 
according to the distance between the two 
holes of the button.

Turn the handwheel to check that the needle 
goes cleanly into the left and right holes of the 
button.

Slowly sew on the button with about 10 
stitches. Select the straight stitch and sew a 
few securing stitches.

1

Move the drop feed lever to lower the feed 
dogs. 

1

 Lowered position

1

:KHQ\RX¿QLVKWKHZRUNPRYHWKHGURSIHHG

lever to raise the feed dogs.

1

 Raised position

Summary of Contents for Q132A





























































Reviews:

No comments