Necchi NL11C, Instruction Manual

Page: 37 / 52

30
v
Changing thread
The following is an easy way to change
threads:
1. Cut the thread in near the spool, behind
the guides on the telescopic thread stand.
2. Remove the thread spool and place the
new thread on the spool pin.
3. Tie the end of the new thread to the end
of the old thread. Cut the thread tails to
2-3cm (approx. 1") in length and firmly pull
both threads to test knot security.
4. Raise the presser foot.
5.
First note tension dial settings and then
turn the tension dials down to "0".
6. Pull the threads through the machine one
at a time until the knots are in front of the
needle. If the threads do not pull easily,
check for tangles on thread guides or
looping under thread stand.
7. Cut the thread behind the knot and thread
the needle.
8. Return tension dials to previous settings.
Sewing