3
GETTING READY TO SEW
Connecting the Power Supply
• Using the foot control
Turn off the power switch.
Pull out the foot control cable gently. Insert the foot
control plug into the foot control jack.
Insert the machine plug into the machine socket.
Insert the power supply plug into the wall outlet.
Turn on the power switch.
q
Power switch
w
Control plug
e
Foot control jack
r
Machine plug
t
Machine socket
y
Power supply plug
u
Wall outlet
The foot control sign will be displayed when the foot
control is connected to the machine.
i
Foot control sign
q
w
e
r
t
y
u
i
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.
Operating Instructions:
The symbol “O” on the switch indicates the “off”
position.
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one
way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way (U.S.A. and Canada only).
Foot control model YC-485EC-1 is used with this
sewing machine.
