September 2004
NEC Business Solutions Ltd
56 -
Installing the Optional Equipment
Doc.
No.
8
846 -
Release
1.
1
Sept
ember
2004
3.2 Unpacking (DSPDB-A1)
Unpack the DSPDB-A1 and check it against the following list. Inspect
for physical damage.
3.3 Switches and Connector Locations
3.4 Installing the DSPDB-A1 PCB
1. Open and pull out the Sub-Cover.
2. Loosen two screws and remove the Main-Cover.
Items
List of Contents
QTY
DSPDB-A1
DSPDB-A1 PCB
1
Nylon Spacers
4
CF (Compact Flash) Card
1 (mounted)
• Make sure the Nylon-Spacers are inserted in each corner of the DSPDB-A1
PCB.
• The spacers must be attached from the back of the DSPDB-A1 PCB so
when installed, the CF slot is facing up.
