May 2001
System Hardware Manual
7 - 195
A6-32
400
0-6
42-0
1
–
R
e
le
as
e 4
.0
Ma
y 2
001
6.
If an adapter is being installed, press tabs A and B to remove the
dummy end from the base plate as shown in Figure 7-5 Removing
Base Plate Dummy End.
7.
Cut the dummy end in half as shown in Figure 7-6 Cutting Dummy
End in Half.
8.
If Adapter is installed in Connector 1 as show in Figure 7-7 Installing
Adapter in Connector 1, Install Dummy end B as shown in Figure 7-
8 Installing Dummy End B.
Figure 7-5 Removing Base Plate Dummy End
Figure 7-6 Cutting Dummy End in Half
Figure 7-7 Installing Adapter in Connector 1