NEC Australia Pty Ltd
Xen Master & Xen Axis
5 - 128
Installing Electronic Telephone Units
A6-3
240
00-6
42-
01 –
R
e
leas
e 4
.0
M
a
y
20
01
The COI(8)-U( ) ETU provides identical circuits to serve
up to eight CO trunks that can be any combination of
DTMF and Decadic signalling. Refer to Figure 5-17
COI(8)-U( ) ETU.
4.3.2
Installation
A maximum of 8 COI(8)-U( ) ETUs can be installed in the
Xen Master system (maximum of 64 trunks) in slots S1~S8
in the first, second or third KSU.
A maximum of 2 COI(8)-U( ) ETUs can be installed in the
Xen Axis system (maximum of 16 trunks) in slots S3 ~ S7.
4.3.3
Switch Settings
The Reset Switch resets the Unit.
4.3.4
LED Indications
Live LED indications are listed below.
✆
Blinking Red
Normal Operation
✆
Steady Red
Operation Stopped (power still on)
✆
Off
No Power
16
LEDs 101~801 indications are listed below.
✆
Steady Red
Lines 1~8 busy
✆
Off
Lines 1~8 idle
4.3.5
Connectors
The following connector is located on the COI(8)-U( ) ETU.
Figure 5-17 COI(8)-U( ) ETU