1 - 152
Tandem Transfer SMDR Print Extension Assignment
NEC Business Solutions Ltd
Xen Master & Xen Axis
A
6
-324000-
642-
02 - Release 6.0
May 20
03
1-4-04
System Mode
1
Submode
4
Data No.
04
PC Programming
a
+AT
Tandem Transfer SMDR Print
Extension Assignment
General Description
Use this Memory Block to specify a special number to be output from Station Message
Detail Recording (SMDR) to indicate an automatic Trunk-to-Trunk transfer.
Display
Programming Procedures
1
Go off-line.
2
Press LK1 +
LK4 +
KD
to access the Memory Block.
3
Use the dial pad to enter the Table Number and Setting Data.
Note:
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
Setting Data Allowed
2-Digit Number:00~99
3-Digit Number:000~999
4-Digit Number:0000~9999
Default Values
3-digit number = 999
4
Press
N
to write the data.
5
Press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
2-, 3-, or 4-Digit Station Number Selection
N
1. When the system is powered up initially, this block defaults to 3-digit number 999.
2. If 2-digit station numbers are selected, this block defaults to 99.
3. If 4-digit station numbers are selected, this block defaults to 9999.
0 4 : T A N D
E X T =
9 9 9
T I M E
D I S P L A Y
Data
No.
Title
Setting
Data