NEC XEN IPK DIGITAL TELEPHONE, Programming Manual

Page: 234 / 638

214 – Chapter 1
DRAFT 3
External Speaker Chime Selection, 1-7-08
December 2004 NEC Business Solutions Ltd
Doc.
No.: 8194 -
Release 2.0
Dece
mber 2004
1-7-08
System Mode
1
Submode
7
Data No.
08
PC Programming
+ BP
External Speaker Chime
Selection
General Description
Use this Memory Block to determine whether paging alert tone (4 tones) or alert chime sounds
before the speech path is established, or after, or before and after.
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates
the default setting.
PRT C-S C-B
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7 + KH to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
LK - On = Enabled
LK - Off = Disabled
4 Press
N
to write the data.
5 Press
P
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-7-03 External Paging Alert Tone Selection
1-7-09 External Speaker Chime Start Time Selection
N
Memory Block 1-7-03 External Paging Alert Tone Selection must be enabled before this Memory Block has any affect.
0 8 : S P K O N P R T
T I M E D I S P L A Y
Data
No. Title
Setting
Data