manualshive.com logo in svg

NEC Versa Note VX Series, Service And Reference Manual, Page: 73 / 86

Share
Download
NEC Versa Note VX Series Service And Reference Manual Download Page 73

4   Specifications

n

 

Capacity (depending on the model) 6.0-GB, 12-GB, or larger hard disk drive

 CD-ROM Drive

n

 

Thin-type CD-ROM Pack

n

 

Access Time — 24X

n

 

Interface — IDE (ATAPI)

n

 

Photo CD Compatibility — Multisession Photo CD, Single Session Photo CD, Video
CD, CS-I, CD-I Ready, CD-G and CD-Plus

 Mini-PCI Modem

n

 

K56 Flex compatible

n

 

V.34 extended rate protocol

n

 

V.90 compliant

n

 

Enhanced AT command set

n

 

Class 1 and 2 Fax protocols

n

 

Built-in speaker with software controllable volume

 Mini-PCI LAN

n

 

10Base-T and 100Base-TX

n

 

Resume-on-LAN support

n

 

Full duplex support

n

 

Auto-sensing

n

 

Software support for management server

 Mini-PCI Modem/LAN

Modem

n

 

K56 Flex compatible

n

 

V.34 protocol

n

 

V.90 compliant

n

 

Class 1 Fax protocol

LAN

n

 

10/100 Ethernet

n

 

Full duplex support

n

 

Wake-on-LAN support

n

 

Auto-sensing

n

 

Low power features

 AC Adapter

n

 

Input Voltage

  

100 to 240 volts (V) AC, 50 watt (max.)

n

 

Output Voltage

  

19 volts DC, 2.6A

Summary of Contents for Versa Note VX Series























































































Reviews:

No comments