![background image](http://html2.mh-extra.com/html/nec/v300x-series/v300x-series_user-manual_4304692082.webp)
73
7. Appendix
1
Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Indicator Messages
Power Indicator
Indicator Condition
Projector Condition
Note
Off
The power cable is unplugged.
n
Blinking light
Green 0.5 sec On,
0.5 sec Off
The projector is getting ready to turn on.
Wait for a moment.
2.5 sec On,
0.5 sec Off
Off Timer is enabled.
n
Steady light
Green
The projector is turned on.
n
Orange
[NORMAL] is selected for [STANDBY MODE]
n
Red
[POWER-SAVING] is selected for [STANDBY
MODE]
n
Status Indicator
Indicator Condition
Projector Condition
Note
Off
Normal or Standby ([POWER-SAVING] for
[STANDBY MODE])
n
Blinking light
Red
1 cycle (0.5 sec
On, 2.5 sec Off)
Lamp cover error or lamp housing error
Replace the lamp cover or lamp housing cor-
rectly.
2 cycle (0.5 sec
On, 0.5 sec Off)
Temperature error
The projector is overheated. Move the projector to
a cooler location.
4 cycle (0.5 sec
On, 0.5 sec Off)
Fan error
Fans will not work correctly.
6 cycle (0.5 sec
On, 0.5 sec Off)
Lamp error
Lamp fails to light. Wait a full minute and then
turn on again.
Green
Re-firing the lamp (The projector is cooling
down.)
The projector is re-firing.
Wait for a moment.
Steady light
Green
Standby ([NORMAL] for [STANDBY MODE])
–
Orange
Cabinet button is locked
You have pressed cabinet button when Cabinet
Button is locked.
CONTROL ID error
Remote control ID and projector ID are not
matched.
Lamp Indicator
Indicator Condition
Projector Condition
Note
Off
Normal
n
Blinking light
Red
Lamp has reached its end of life. Lamp replace-
ment message will be displayed.
Replace the lamp.
Steady light
Red
Lamp has been used beyond its limit. The projec-
tor will not turn on until the lamp is replaced.
Replace the lamp.
Green
[ECO MODE] is set to [ON]
n
Over-Temperature Protection
If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the lamp
WITHTHE34!453INDICATORBLINKINGCYCLE/NAND/FF
Should this happen, do the following:
s 5NPLUGTHEPOWERCABLEAFTERTHECOOLINGFANSSTOP
s -OVETHEPROJECTORTOACOOLERLOCATIONIFTHEROOMWHEREYOUAREPRESENTINGISPARTICULARLYTOOWARM
s #LEANTHEVENTILATIONHOLESIFTHEYARECLOGGEDWITHDUST
s 7AITABOUTMINUTESUNTILTHEINSIDEOFTHEPROJECTORBECOMESCOOLENOUGH
Summary of Contents for V300X Series
