NEC UNIVERGE WL, Quick Installation Manual

Page: 26 / 34

1-20
UNIVERGE WL Access Point (External-Antenna) Quick Installation Guide
Flush Wall Mount
Flush Wall Mount
When you are mounting the UNIVERGE WL AP against a wall (flat side toward
the inside of the building), use an optional factory-orderable flush-mount
bracket.
• Before proceeding, gently screw the two factory-supplied screws and
spring washers into the bottom of the UNIVERGE WL AP. Make sure the
spring washers have their convex (high center sections) pointing toward
the screw heads.
Figure - Assembling the Mounting Screws and Spring Washers to the UNIVERGE
WL AP
• Copy the MAC address(es) from the label(s) on the UNIVERGE WL AP
onto the corresponding location on the map. MAC addresses have the
format 000B85xxxxxx.
• You have already attached the flush-mount bracket to the wall in
Step 3: Preparing Mounting Locations .
NOTE
The UNIVERGE WL AP threaded holes have precision-depth threads. Do
not overtighten the screws, or the bracket will not fit under the screw
heads.