System Configuration
39
Configuring Startup Options and Error Notices
When messaging system errors occur a message can be sent to a designated subscriber. Configure at least one
subscriber, usually a system manager, to receive error messages.
To configure the system startup options and to send error messages
1.
In the Navigation Pane, click
System
>
Configuration
>
System Settings
.
For detailed field information, see the
System > Configuration > System Settings
2.
Type the startup options in the
Startup
field.
C.
Disable Disk Fault Tolerance. Disk Fault Tolerance is a type of error handling for the messaging system
conversation. When the system encounters problems accessing the hard disk while playing a prompt or
message, the system treats the prompt or message as if it were missing and continues the conversation. The C
setting sets the system to halt the conversation and display an error message that a file is inaccessible.
CNG.
Incoming Fax Tone. The messaging system identifies incoming fax tones with the default settings. The
default settings are 1100 hertz, +/- 38 hertz and +/- 15% of cadence. To specify different fax tones, type
cng=<frequency>,<dev>,<timedev>
. For example, “cng=1050,55,18” looks for a fax carrier of 1050 hertz,
+/- 55 hertz and +/- 18% of cadence.
mk<n>.
System IDs During Directory Menus. Enables callers to enter full system IDs during directory menus,
where <
n
> is the number of seconds the messaging system waits before routing a call to a destination on a
directory menu.
3.
In the
Error notices to
field, type the subscriber system ID.
•
To send error messages to more than one subscriber, use commas to separate additional system IDs.
•
Use system ID 0 (zero) in the list to send error messages to all subscribers configured to receive public
messages.
4.
Click
Save
.
To turn off all error messages
1.
In the Navigation Pane, click
System
>
Configuration
>
System Settings
.
2.
Delete all system IDs listed in the
Error notices to
field.
3.
Click
Save
.
Related Topics
Summary of Contents for Univerge UM8000
