Chapter 1 CCIS FEATURES
1-253
NWA-088654-001 Rev.1.0
94ch1006.fm
VOICE CALL-CCIS
VOICE CALL-CCIS
General Description
This feature provides a voice path, through the CCIS network, between a Multiline Terminal in one office
and a Multiline Terminal in another office. This path is established from the calling party to the called par-
ty’s built-in speaker. If the called party’s
MIC
lamp is on, the called party can have a conversation in
hands-free.
Programming
Operating Procedure
From a Multiline Terminal to another Multiline Terminal:
1. The originating Multiline Terminal user dials the desired station number in another office, and re-
ceives ring back tone.
2. The calling party presses the Voice Call feature key.
A signal tone is transmitted over the CCIS network to the called party’s speaker.
The calling party’s LCD shows:
3. The called party presses the
MIC
key (if the
MIC
lamp is not lit) to allow two-way conversation
with the calling party.
DESCRIPTION
DATA
Assign a Voice Call key to the Multiline Termi-
nal.
•
(1)
(2)
Y=00
My Line No. +
+ Key No.
F1002: Voice Call
START
CM90
,
END
Called Multiline Terminal
VOICE CALL XXXX
(TIME DISPLAY)