NEC Univerge SV9100, System Hardware Manual

Page: 505 / 556

Issue 2.0
SV9100 System Hardware Manual 7-29
3. Connect the NEC VoIP telephone to the TEL connector on the ILPA-R
adapter with the LAN cable provided with the adapter.

If a customer-provided cable is used, the total length from the
switch to the telephone should be less than 328 feet.

The adapter can be positioned either closer to the multiline
terminal or switch – it does not matter.
4. Connect a crossover LAN cable to the LAN connector on the ILPA-R
adapter. Plug the opposite end into the switch which is to provide
power to the telephone. Refer to
Figure 7-22 NEC Terminal
Connection to an IEEE 802.3af PoE Switch .

If a straight-through cable is used, NIC Auto Detection must be
enabled in Programs 10-12-05 (GCD-CP10), 84-05-02
(VOIPU) or 85-01-03 (SHUBU).
Figure 7-22 NEC Terminal Connection to an IEEE 802.3af PoE Switch