NEC Univerge SV9100, System Hardware Manual

Page: 402 / 556

Issue 2.0
5-60 Installing DT Series Digital and IP Multiline Terminals
4.6 Installing the Directory Card on the Multiline Terminal
A directory card can be attached to DT300/DT700 Series multiline terminals. The
directory card can be used to record often dialed numbers or other important
information.
1. After recording the information on the lined insert, reinsert it between the
plastic panels of the directory card. Attach the directory card to the directory
card holder as illustrated in
Figure 5-52 Attaching Directory Card to
Directory Card Holder . The open end slides into the directory card holder.
2. Locate the two grooves on the top of the telephone as illustrated in Figure
5-53 Attaching Directory Card Holder to the Multiline Terminal . Push the
directory card holder into the grooves on the multiline terminal until they
snap into place.

To remove the directory card, press the two sides of the directory card holder
inward until the tabs release and pull the holder out of the grooves.
Figure 5-52 Attaching Directory Card to Directory Card Holder
Directory Card
Directory Card
Holder