NEC Univerge SV9100, System Hardware Manual

Page: 399 / 556

Issue 2.0
SV9100 System Hardware Manual 5-57
9. Install the supplied Line Key Panel (refer to Figure 5-51 Installing the
Line Key Panel ). A variety of colors is now available for the 12 and 24
button LK Panels (refer to Chapter 1, Table 1-10 SV9100 Optional
Equipment List on page 1-13 ).
10. Install the side panel.
11. Connect the line cord/LAN cable and the AC/DC adapter to the
DTL/ITL multiline terminal.
4.5.2 Configuring the Digital Telephone for the Correct Number of
Line Keys
1. With the telephone not plugged in and the handset on-hook, press the
4
and
6
buttons on the numbered keypad and connect the telephone
cable.
 This places the telephone into Service Class Read/Write (R/W)
mode. The Message Waiting (MW) LED should be On.
2. Press
1
to enter the Line Key Type mode.
 The Message Waiting LED should flash.
Figure 5-51 Installing the Line Key Panel
Line Key
Panel