NEC Univerge SV9100, General Description Manual

Page: 26 / 190

Issue 2.0
1-2 Introduction to UNIVERGE SV9100
Migration
The UNIVERGE SV9100 builds upon NEC’s very successful UNIVERGE SV8100,
making it easy to migrate. Legacy UNIVERGE SV8100 customers can leverage
previous investments to migrate to the new systems with very minimal effort or cost.
S
ECTION
2 UNIVERGE SV9100 S
YSTEM
C
APACITIES
The UNIVERGE SV9100 CHS2UG GW-US is a 9.5” chassis that has three universal
slots and one PSU. The standalone module provides 48 total ports (32 digital
terminals) and can include any combination of stations and trunks below this number.
Refer to
Figure 1-1 UNIVERGE SV9100 CHS2UG GW-US 9.5” Chassis on page 1-2 .
The UNIVERGE SV9100 9.5" Base chassis provides up to 16 trunk ports or 32
extension ports. An Expansion Chassis can be installed to the right of the Controlling
or Base Chassis providing an additional 48 ports (40 trunk/ 80 stations maximum)
and can include any combination of stations and trunks below this number. With a
maximum of four Base and four Expansion chassis the system will provide up to 184
trunks and 320 extensions. With IP connections, a maximum of 400 trunk ports
(maximum of 128 talk paths supported with GPZ-IPLE blade installed) and 896
station ports is possible. Refer to
Figure 1-2 UNIVERGE SV9100 9.5” Base and
Expansion Chassis .
Figure 1-1 UNIVERGE SV9100 CHS2UG GW-US 9.5” Chassis