NEC Univerge SV9100, Features And Specifications

Page: 815 / 1402

815
K-CCIS – Call Rerouting
Description
The CCIS Call Rerouting feature allows a system to use multiple call routing priorities
when remote system trunks are all busy. The four priorities can be local or remote
trunks. For example using ARS and F-Route table priorities the system can try up to
four remote systems or up to three remote systems and a local trunk to route the
outbound call to its destination. If an outbound route is unavailable for any reason
the call will fall through to the next priority.
K-CCIS Call Rerouting Network
Conditions
The originating system must have a dial treatment of D019RE where 9
is the ARS trunk access code in the destination system for this
feature to work.
ARS must be enabled in all systems for this feature to work.
The CCIS Call Rerouting feature is not supported on stations using 3rd party CTI.
The CCIS Call Rerouting feature is not supported on a station which is
controlled by 1st party CTI.
The CCIS Call Rerouting feature can only use the four routing options contained in one
F-Route table.
The CCIS Call Rerouting feature cannot fall through from one F-Route table to a second
F-Route table.
If none of the four F-Route table route priorities are available the outbound call will fail.
K