NEC Univerge SV9100, Quick Install Manual

Page: 14 / 32

NEC SV9100 Communication System
14 Quick Install Guide
– UNIVERGE ST500 Mobile Client v1.0
Alarm
No.
Alarm
Type
Report Name Content of Alarm Possible Cause(s)
61 Not
Enabled Disabled SIP extension
trouble information. Failed in the registration of a SIP extension
terminal.
The SIP extension terminal was not able to
acquire a DSP.
• At Registration to SV9100 of the SIP
extension terminal.
• When you cannot acquire the DSP resource
when it sends it.
The registered port is used by
other extension.
The number of licenses is
insufficient.
DSP of IPLE was not able to
be acquired.
64 Major Disabled VoIPDB LAN Link
Error. The link of LAN of VoIPDB disconnected. LAN cable is defective.
Connected network device
not working.
Defect in IPLE.
65 Not
Enabled Disabled VoIPDB trouble
information. When DSP of VoIPDB notifies Error. Defect of IPLE.
66 Minor Disabled SIP extension
License Error. More than the number of licenses to which
the SIP extension terminal was turned on at
REGISTER. Lack of number of licenses.
68 Minor Disabled VoIP DSP All Busy
Alarm
1
.
Provides alert when all
DSP resources are being
used.
2. Used to troubleshoot or alerting when
upgrade is needed.
Not enough DSP resources in
system.