Issue 1.0
IDT/Net2Phone
10
SIP Trunking Service Configuration Guide
10-54-2 : Blade License Setup – Quantity
Assign the quantity of VoIP DSP Channel Licenses (5103)
.
The License quantity can be found on Feature Activation Page.
3.4
IPL DSP Basic Setup
Values shown are for example purposes only. Your actual IP values will be
determined by your local LAN administrator.
Figure 6 IPL DSP Basic Setup
Port Forwarding:
The Router will require port forwarding rules to be configured.
Port 5060 must be forwarded to the address entered in Program 10-12-09.
Port 5060 is not used for remote terminals - ports 5070 and 5080 are used
instead. Port 5060 is only used for trunking so there are no issues with the
possible fraudulent usage of unauthorized remote attempts to register remote
terminals.
The ports used in Programs 84-26-02 and 84-26-03 must be forwarded to the
IP address entered in Program 84-26-01.
The RTP/RTCP ports are forwarded to avoid possible one-way conversation
which might occur on inbound calls. The Port Forwarding Range is determined by
how many VoIP DSP Resources are licensed to the GCD-CP10. This information
can found on the Feature Activation screen in WebPro, and is the same quantity
that was entered in PRG 10-54 for feature code 5103.
