NEC UNIVERGE SL2100, Programming Manual

Page: 406 / 678

Item
No.
Item Input Data Description Default
14 Date 0 = Not Displayed
1 = Displayed Determine whether or not the date should
be displayed on SMDR reports.
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
0
15 CLI/DID Number
Switching 0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name Determine whether or not the CLI/DID
Number Switching should be displayed. 0
16 Trunk Name or Re-
ceived Dialed Number 0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both Determine how the SMDR should print in-
coming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead. 0
17 Print Account Code
or Caller Name of In-
coming Call 0 = ACC
1 = CNAME Determine if SMDR should print Account
Code or Caller Name of Incoming Call. 0
18 Print Mode for Caller
Name of Incoming
Call 0 = Normal
1 = Line Feed Determine how SMDR should print Caller
Name of Incoming Call. 0
21 S-Point Terminal
Number 0 = MSN Number
1 = Extension Number 0
22 Security Auto Dialing 0 = No Output
1 = Output Emergency call from Watch Mode. Define
SMDR output on/off. Output is SAD (Se-
curity auto dialing). 1
23 Watch Auto Dialing 0 = No Output
1 = Output Emergency call from Remote Inspection.
Define SMDR output on/off. Output is
WAD (Watch auto dialing ) 1
25 Call Waiting 0 = No Output
1 = Output Define Call Waiting output on/off 1
Table 2-12 SMDR FORMAT
CLSS TIME LAIN DURATION STATION DIALLED No./CLI RD.COST ACCOUNT
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
: : : : : : : :
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
Conditions
None
Feature Cross Reference
• Station Message Detail Recording
SL2100 ISSUE 2.0
2-382 Program 35 : SMDR Account Code Setup
Program
35