11
2. Projecting an Image (Basic Operation)
❷
Connecting Your Computer/Connecting the Power Cord
1.
Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other connections, see “6.
Installation and Connections” on page
Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the computer’s port (mini
D-Sub 15 Pin). Turn two thumb screws of both terminals to fix the computer cable (VGA)
2.
Connect the supplied power cord to the projector.
First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cord in the wall outlet.
The projector’s power indicator will start blinking orange.
*
This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator
section.(
→
CAUTION:
Parts
of
the
projector
may
become
temporarily
heated
if
the
projector
is
turned
off
with
the
POWER
button
or
if
the
AC
power
supply
is
disconnected
during
normal
projector
operation.
Be
careful
to
handle
the
projector.
COMPUTER IN
Make sure that the prongs
are fully inserted into both
the AC IN and the wall
outlet.
To wall outlet
←
