NEC SV8500, Manual

Page: 921 / 3438

VOL.2-668
MG-COT Card [SCA-6COTB]
• When DHCP server is NOT used & DNS server is used
Set the following data on MG-COT Card.
• IP address of DNS server
• IP address and subnet mask of MG-COT Card (own address)
• Host name of MG-COT Card
• IP address of Default Gateway
• Host name of SIP server
• Ethernet Speed
Note:
When the DHCP is set to “ENABLE”, IP addresses assigned here cannot take effect. Be sure to assign
“SET DHCP DISABLE” before starting the IP address setting.
1. DNS server IP Address
2. IP Address and Subnet Mask of MG-COT Card
3. Host name of MG-COT Card
Note:
Enter the host name in full-domain format.
--- DNS IP Address set ---
Current DNS IP Address : 0.0.0.0
Change DNS IP Address ? [Y(change)/N(current)/Q(quit)] : Y
Input new DNS IP Address: 10.41.1.150
--- IP Address & Subnetmask set ---
Current IP Address: 0.0.0.0
Current Subnetmask: 255.255.255.0
Change IP Address & Subnetmask? [Y(change)/N(current)/Q(quit)] :
Y
Input new IP Address : 10.41.1.100
Input new Subnetmask: 255.255.255.0
--- Host Name set ---
Current Host Name: No Value
Is there the Host Name [Y/N]: Y
Input new Host Name : mcsip.nec.com