NEC SV8500, Manual

Page: 735 / 3438

VOL.2-482
MCMG Card [SCA-7COTA]
12. Setting DSP smooth PAD mode:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
13. Setting RVS mode (for Australia):
14. Setting Auto Polarity
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Enter a value of smooth PAD(1-5, OFF).
OFF=Set smooth PAD mode to OFF
1=+2.0dBm (default)
2=-5.2dBm
3=-2.1dBm
4=-0dBm
5=-4.2dBm
Line 2: Result is shown.
MC-MG > SET SMOOTH_PAD_MG 3
Smooth PAD Model setting succeeded.
Line 1:
Line 2: Enter RVS mode
ROA = Reversal on Answer (default)
ROS = Reversal on Seizure
Line 3: Result is shown
MC-MG > SET RVS_AUST
Reverse Watch (AU) setting succeeded.
Reverse Watch (ROA/ROS): ROA
Line 1: Specify the auto polarity
OFF=Invalid (default)
ON=Valid
Line 2: Result is shown
MC-MG > SET AUTO_POLARITY OFF
Auto Polarity setting succeeded.