NEC SV8500, Manual

Page: 3305 / 3438

VOL.3-818
CHAPTER 4 CONFIGURATION SETUP
Note 1:
“SIP server” used here refers to the Telephony Server. The Telephony Server acts as SIP server where
DT700 Series terminal is registered.
Note 2:
About IP address of SIP server (Telephony Server), refer to “Registration Destination of IP Devices/Sta-
tions” in INTRODUCTION of Installation Manual.
Note 3:
Howler Tone is not available. Be sure to assign “Disable” to this parameter.
Note 4:
DESI-less mode allows access to line/feature keys automatically during off-hook state.
1. XML Settings Specifies XML browser function. - X X X
1. Terminal ID Login number for accessing XML server. - X X X
2. XML Browser Sets XML browser related data. - X X X
1. Home URL
Sets the address of the contents to access when
starting up XML browser.
- X X X
2. Proxy Settings Sets proxy server related data. - X X X
1. Proxy IP Sets proxy IP address of XML browser. - X X X
2. Proxy Port
Sets proxy port of XML browser [1024-
65535].
8080 X X X
3. Directory URL Sets URL of Corporate Phonebook. - X X N
2. IPM Self Port
Sets the port for connecting to IP Phone
Manager [1024-65535 (except 17185, 60000)].
3530 X X X
3. Incoming Popup Not used. - - - -
4. Screen Saver URL Not used. - - - -
5. Emergency Call
Sets the destination number of emergency call
which a terminal user can originate even while
the Security Mode is in service.
- X X N
Emergency Dial 1
Up to three destination numbers can be
specified.
Emergency Dial 2
Emergency Dial 3
6. DESI-less Mode Note 4 Sets the DESI-less screen view.
DESI-less
Mode 2
X N N 1. DESI-less Mode 1
Switches the LCD to DESI-less mode off-
hook.
2. DESI-less Mode 2 Does not change the LCD to DESI-less mode.
0. Config
(Continued) (Earlier than FW 2.0.0.0)
Parameter Description Default
DT750
Series DT730
Series DT710
Series