NEC SV8500, Manual

Page: 3092 / 3438

VOL.3-605
CHAPTER 4 CONFIGURATION SETUP
5.1 QoS
On the QoS Menu, the QoS information can be displayed.
STEP 1:To open the QoS screen, press “1” key on the Online Monitoring Main screen.
Note:
Press Exit key to go back to the normal operation display.
Online Monitoring Main Screen
STEP 2:The QoS screen appears as follows:
Note:
Press Exit key to go back to the normal operation display.
Press Prev key to go back to the Online Monitoring Main screen.
• Lost Packet: The number of packet-loss events (8 digits)
Note 1
,
Note 2
• Codec : Codec
Note 3
• Payload : Payload size
Note 3
Note 1:
The maximum displayable value is “99999999”. Even if the number of packet-loss events is more than
99999999, “99999999” is displayed on the LCD.
Note 2:
During a conversation, the number of packet-loss events for five seconds is displayed. After a lapse of five
seconds, the counting of the number of packet-loss events is started again and the result of the next five
seconds is displayed on the LCD.
Except during a conversation, the number of packet-loss events for the last call is displayed. If starting a
new call, the number of packet-loss events for the last call is cleared and the counting for the new call is
started.
Up Down
1.QoS
2.System Information
3.Ping
Exit
Up Down
1.Lost Packet
2.Codec
3.Payload
Prev
: XXXXXXXX
G.XXXx
:
XXms :