NEC SV8500, Manual

Page: 3015 / 3438

VOL.3-528
CHAPTER 4 CONFIGURATION SETUP
Note 1:
For DtermIP (SIP) with Firmware Version 3.0.0.0 or later.
Maintenance Settings
Parameter
Description
1. Download Menu
Settings for the downloading.
1. Download
Download the F/W.
1. Program Download the program.
2. Music Download the data of music on hold.
3. Boot & Program Download the boot and program.
4. Flash Memory Image Download the flash memory image.
5. Config * Not Supported
6. Certificate * Not Supported
2. Download Address
Set IP address of the TFTP/FTP server.
2. Hard Reset
DtermIP (SIP) is reset without saving the data (hard reset).
3. Factory Value
Reset the DtermIP (SIP) to its factory defaults.
4. Simple Test Mode
Perform the phone test.
1. Test Call On
Perform the telephone call test.
2. Call Test Address
Set IP address of the destination telephone.
3. Key Test(Random)
Perform the key test (keys are randomly pressed).
4. Key Test(Seq.)
Perform the key test (keys are sequentially pressed).
5. Voice Loopback
Perform the voice loopback test.
1. Handset - Hand Speaker Send: Handset - Receive: Handset
2. Handset - Speaker Send: Handset - Receive: Speaker
3. Headset - Head Speaker Send: Headset - Receive: Headset
4. Headset - Speaker Send: Headset - Receive: Speaker
5. MIC - Handset Speaker Send: Microphone - Receive: Handset
6. MIC - Headset Speaker Send: Microphone - Receive: Headset
7. MIC - Speaker Send: Microphone - Receive: Speaker
6. Speaker Test
Perform the speaker test.
1. America You hear Dial Tone (North America) from the speaker at the
maximum volume.
2. Japan You hear Dial Tone (Japan) from the speaker at the maximum
volume.
5. Config Password Mode
Note 1
Set the control method of Configuration password.
1. Disable
Set the login password authentication to OFF.
2. Enable
Set the login password authentication to ON.
New Password? Enter the login password for user mode.
Confirm Re-enter the login password for user mode.
6. Auto Config
* Not Supported