NEC SV8500, Manual

Page: 2992 / 3438

VOL.3-505
CHAPTER 4 CONFIGURATION SETUP
Note 1:
The default setting is “1: HEADSET”.
(b) Press the SRC key. The display returns to the first page of the Configuration Menu.
(c) To assign data to additional configuration items, refer to the Selecting a Configuration Item section.
When finished, proceed to the Updating the Configuration Data section.
2. HEADSET TYPE
This item specifies the type of headset connected to the HAND H/S0 and H/S1 connector.
(a) Press the desired number. An asterisk (*) shows the selected number.
1. The type of headset is “SUPRA F53U-U03F”.
2. The type of headset is “Wideband SupraPlus NC Polaris (HW251N plus A10 connector cable)” or “SU-
PRA-NC Polaris”.
3. The type of Headset is “GN2200”.
SRC: Return to the Configuration Menu
Note 1:
The default setting is “1: SUPRA NEW SIGMA”.
(b) Press the SRC key. The display returns to the first page of the Configuration Menu.
(c) To assign data to additional configuration items, refer to the Selecting a Configuration Item section.
When finished, proceed to the Updating the Configuration Data section.
3. MUTE
This item specifies the On/Off setting of the mute function for the HAND H/S0 or H/S1 connector.
[CONFIG MENU P1] VER x SRC: prev page
1: HEADSET/HANDSET DEST: next page
2: HEADSET TYPE Release: exit
3: MUTE Answer: update
[HEADSET TYPE] SRC: menu
*1: SUPRA NEW SIGMA
Note 1
2: SUPRA POLARIS Series
3: GN2200 Series
[CONFIG MENU P1] VER x SRC: next page
1: HEADSET/HANDSET DEST: next page
2: HEADSET TYPE Release: exit
3: MUTE Answer: update