NEC SV8500, Manual

Page: 2277 / 3438

VOL.2-2024
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
• When DHCP server and DNS server are used
In this setting, because IP addresses are automatically distributed from DHCP server, it is not required to
set IP address on VS-32(Dual) side. Set the following data on VS-32(Dual):
• Communication Speed of LAN Interface
IP addresses listed below, however, need to be assigned on DHCP server side.
Note 1
• IP address of Default Gateway
• IP address of DNS server
• Host name of SIP server
Note 2
* Check the number of IP addresses saved in DHCP server is sufficient so as to get IP address of VS-32(Du-
al) anytime.
Note 1:
Assign the required DHCP option in Add Option Type dialog box as follows:
Class: Global
Name: Not specified, but do not enter the same option name in duplicate (e.g. SP1)
Data: IP address
Array: Checked
Code: See the table below.
Refer to DHCP Server in Volume 2 of this manual for more information on DHCP option setting.
Note 2:
VS-32(Dual) need not assign host name of SIP server in configuration setting because the host name as-
signed on DHCP server side is applied.
OPTION NAME CODE REMARKS
IP address of Default Gateway 003 Required when DHCP server is active.
IP address of DNS server 006 Required when host name is assigned to code 120.
Host name 012 Invalid when code 015 is not assigned.
Domain name 015 Invalid when code 012 is not assigned.
IP address or host name of SIP server 120
Either code 120 or 162 is required. Code 120
turns invalid when code 162 is assigned.
IP address of the Telephony Server 162