NEC SV8500, Manual

Page: 2256 / 3438

VOL.2-2003
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
3. Port Numbers
The following provides the port number to be used in the system
Note 1:
The packet between TP and SP (“TP
⇔
SP” in the table) does not flow over the network because both of
which are part of the Telephony Server.
Note 2:
The packet related to SP internal control port does not flow over the network.
Port Number in Proprietary Protocol mode
Function
TP side
Port Number
(default)
How to Change Port Number
VS-32(Dual)
⇔
Telephony Server
Registration 3456 Default value can be changed by ADTM command.
iLP-PM 60130 Default value can be changed by ADTM command.
Peer to Peer
P2P communication
control port
62000
Default value can be changed by the configuration com-
mand
SET PORTNUMBER . RTP start port 1024
H.245 start port 60000
Port Number in SIP mode
Function
TP side SP side
LAN Port
(default)
Port Number
(default)
Command to
Change Setting
Port Number
(default)
Command to
Change Setting
TP
⇔
SP
Note 1
Registration LAN1 3456
ADTM
(Port Number only)
22000 Cannot be changed
iLP-PM LAN1 60130
ADTM
(Port Number only)
64105 ALIDL
SP Internal
Control Port
Note 2
iLP-PM - - -
64010 ALIDL
22001 ASPC
VS32(Dual)
⇔
SP
SIP - - - 5060 Cannot be changed
H.245
Negotiation
Ready - - - 22002 ASPC
H.245 - - - 22003 ~ 26000 ASPC