NEC SV8500, Manual

Page: 1908 / 3438

VOL.2-1655
MG-SIP96
When “1” is selected:
When “2” is selected:
(a) If the firmware version is SP-3987 MGSIP PROG-B Issue 2 or later.
Note 6: Use of P-Preferred-ID headers of INVITE message differs for each pattern.
When Pattern 1 is set: P-Preferred-ID header is not attached.
When Pattern 2 is set: P-Preferred-ID header is attached. (tel: is used)
When Pattern 3 is set: Not used.
When Pattern 4 is set: P-Preferred-ID header is attached.
When Pattern 5 is set: P-Preferred-ID header is attached. (P-Associated-URI is used)
MG(SIP)> set privacy_pattern
Select Privacy pattern of Calling Party
Number.
0=DisplayName(default)
1=Remote-Party-ID
2=RFC3325
Input:1
0: DisplayName (Default)
1: Remote-Party-ID
2: RFC3323/3325(P-Preferred-ID/Pri-
vacy)
Input a Dummy string.(MAX32(strings))
:anonymous
Enter a dummy string (specified by pro-
vider) in maximum of 32 characters.
MG(SIP)>set privacy_pattern
Select Privacy pattern of Calling Party
Number.
0=DisplayName(default)
1=Remote-Party-ID
2=RFC3325
Input:2
0: DisplayName (Default)
1: Remote-Party-ID
2: RFC3323/3325(P-Preferred-ID/Pri-
vacy)
Select RFC3325 pattern.
0=Pattern 1:privacy_only(default)
1=Pattern 2:TEL-URI
2=Pattern 3:unused
3=Pattern 4:SIP-URI
4=Pattern 5:P-Associated-URI
Input:0
Select an RFC3325 pattern
Note 6
0: privacy_only (Default)
1: TEL-URI
2: unused
3: SIP-URI
4: P-Associated-URI