NEC SV8500, Manual

Page: 1809 / 3438

VOL.2-1556
MG-SIP128 [MG-128SIPMGJ]
Note 7:
irtt : Indicates the initial round-trip time of TCP connections to each route. MG-SIP128
[MG-128SIPMGJ] regards a TCP connection where no reply lasts for the round-trip
time (1 to 12000) as no connection.
(1) status
Displaying status of ports and registration
This command is used to show status of ports and registration on MG-SIP128 [MG-128SIPMGJ].
[Setting Example]
• If displaying port status
Note 1:
The following describes display of port status.
• If displaying status of registration to LAN (Telephony Server side)
MG(SIP)> show status
0:Port status
1:IPX status
2:SIP status
3:CH status
9:Exit 0: Port status (Default)
1: Telephony Server network registration status
2: SIP network registration status
3: Information of channels in use
9: Exit
Select a reference number:0
IPX Port link up(100Base-TX/Full)
SIP Port link up(100Base-TX/Full)
Note 1
Port type Status of port to LAN Status of port to SIP network
1000M/Full IPX port link up (1000Base-T/Full) SIP port link up (1000Base-T/Full)
100M/Half IPX port link up (100Base-TX/Half) SIP port link up (100Base-TX/Half)
100M/Full IPX port link up (100Base-TX/Full) SIP port link up (100Base-TX/Full)
10M/Half IPX port link up (10Base-T/Half) SIP port link up (10Base-T/Half)
10M/Full IPX port link up (10Base-T/Full) SIP port link up (10Base-T/Full)
Link Down IPX port link down SIP port link down
MG(SIP)> show status
0:Port status
1:IPX status
2:SIP status
3:CH status
9:Exit
0: Port status (Default)
1: Telephony Server network registration status
2: SIP network registration status
3: Information of channels in use
9: Exit
Select a reference number:1