UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1
Page 15
CPN To Terminating User - Display
CPN To Terminating User - Display
General Description
This feature provides a visual display of the calling party number and subaddress information on a Multiline
Terminal or an Attendant Console for incoming ISDN calls. This provides the terminal user with a quick and
accurate way to identify the Calling Party Number (CPN).
Operating Procedure
No manual operation is required. The calling party number is automatically displayed on the Terminal.
To change the Calling Number Display/Calling Name Display while the number or name is displayed
Press the display selection key of the Multiline Terminal or Attendant Console while the calling number or name
is displayed. Every time the key is pressed, the display changes to the calling name or number alternatively.
Service Conditions
1. This feature is available on the Multiline Terminal with Display, Attendant Console and D
term
PSII/III.
2. A maximum of 16 digits forming the calling party number (CPN), including the PBX access code, can be
displayed. For subaddress, a maximum of eight digits can be displayed. If the subaddress exceeds eight dig-
its, the first eight digits are displayed. Below is an example of the display when the CPN is 214-555-5000,
and the subaddress is 82623667:
3. The CPN is flashing while the Multiline Terminal is ringing on its Prime Line. The duration of display after
the call is answered can be selected by system data programming (display for six seconds or continuously).
■
Service Conditions on Calling Name Display
1. If the ISDN provides Name Display service (NI-2), the calling party name can be displayed in place of the
CPN. (A maximum of 16 characters)
2. If the ISDN provides Name Display service (DMS100), the calling party name can be displayed in place of
the CPN. (A maximum of 16 characters)
3. The calling name from ISDN can be received by terminating systems such as Trunk Direct Appearance (02),
Trunk Direct Appe TAS (03), Direct-In Termination (04), Automated Attendant (09), ISDN Indial
(18), and Attendant Console (14).
In addition, Sub-address termination is available.
4. The PRI blade is required.
5. When Call Forwarding or Call Transfer routes an incoming call from ISDN to a Multiline Terminal/PS in
the own office, the calling name is displayed on the destination station of Call Forwarding or Call Transfer.
(Elapsed time)
8 2 6 2 3 6 6 7
2 1 4 5 5 5 5 0 0 0
subaddress
calling party number
