NEC SuperScript 750C, User Manual

Page: 32 / 104

Checking print accuracy (Align)
Whenever you insert a new print head or ink cartridge, you
should always check the horizontal and vertical
printing accuracy, to guarantee optimum printing quality.
The Printer Monitor in your printing system makes this
operation extremely easy:
Make sure your printer and PC are powered, your
printing system is installed, both print heads are
inserted and paper is loaded.
1. Open the Printer Monitor on your PC screen.
2. Click the Printer Care tab.
3. Click the Align button, then follow the instructions
displayed.
Printing the “demo” page (Demo)
The demo page gives you a full color and black
monochrome print-out and allows you to check the correct
functioning of the print heads.
1. Check that you are still in the Printer Care tab of the
Printer Monitor.
2. Click the Demo button, then follow the instructions
displayed.
Once you have completed these two operations, you can
close the Printer Monitor.
Help
To simplify the use of the printer, and to help you if you
have problems, this printer has an extensive user interface:
•
from your PC screen; the printing system installed from
the diskette supplied contains a printer driver and Printer
Monitor with user-friendly screen interfaces and a
detailed Help file.
For further details, see “User Interface” and “Using
Software” in the User Guide.
•
the flashing of one or both of the light indicators on the
printer operator panel signals the need for operator
intervention.
For further details, see “Operator Panel” in the User
Guide.
•
two embossed templates (
see figures on page XI
), one
on the printer casing under the cover, the other on the
inside of the cover, illustrate certain operating
procedures.
For further details, see “Embossed Templates” in
the User Guide.
Your printer is now ready for use. If you have problems
with any operating procedure, or are unable to perform a
specific function, always check that you have followed
the instructions as given. If a repetition of the
instructions is unsuccessful, see “Problems and
Solutions” in the User Guide.
10 Quick Start