NEC SL1100 Feature Manual Download

Page: 278 / 288

On the InMail Utility Database Restore Screen, choose the database to be restored to the card
(

Look In: File name:

) and click

Open

. (Refer to

Figure 3-14 InMail Utility Database Restore on

page 3-10

)

Figure 3-14 InMail Utility Database Restore

Restoring a database to an In-Mail CompactFlash card erases all the data currently stored on the
card.

The restore takes several minutes.

Choose the message to be restored, then click

Restore

Once the InMail Utility Restore has completed click

Finish

to close the progress window.

Figure 3-15 Restore Message Screen

SL1100

ISSUE 3.5

3-10

InMail Utility

Summary of Contents for SL1100

































































































































































































































































































Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands

NEC SL1100, Feature Manual

Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands