NEC SL1100, Feature Manual

Page: 253 / 288

Time and Date Stamp
Description
While listening to a message, a Subscriber Mailbox user can dial TI to hear the Time and Date when
the message was left. This is a handy option while reviewing messages. The subscriber can just dial a
code to find out when the message arrived.
Time and Date Stamp with Caller ID
With Caller ID installed, a mailbox user can dial TI while listening to a message to hear the time when
the message was sent, as well as the caller's number.
Related Features
Auto Time Stamp on page 2-29
After a user listens to a message, InMail can optionally announce the time and date when the
message was left.
Caller ID on page 2-43
With Caller ID installed and programmed, the Time and Date Stamp also includes the caller's number.
Listening to Messages on page 2-152
Turn to this feature for additional listening options.
Time and Date on page 2-234
You can set the system time from system programming or from a system extension. You can set the
date only from system programming.
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in
the connected telephone system.
Operation
Hearing the Time and Date when a Message was Left
Log On to Subscriber Mailbox.
L (5) Access the Message Listen mode.
[Lstn]
TI (84) Hear the time and date when the message was sent.
• Turn to Listening to Messages on page 2-152 for more on your listening options.
0 Plays Help message.
ISSUE 3.5 SL1100
InMail Feature Manual 2-235
T