NEC SL1100
Issue 3.01
PC Programming Manual
5 - 5
___________________________________________________________________________________
___________________________________________________________________________________
To use a Wizard to program a feature:
1.
Select the feature Wizard from the Wizard View submenu.
2.
Modify the desired settings on the screen.
3.
Navigate to the next screen in the Wizard by either selecting the desired page
from the
View page in wizard
or by pressing the
Next
or
Back
navigational
buttons.
4.
Complete steps 2 and 3 until all screens are finished.
5.
Apply the changes.
When programming a Wizard, changes to system data are applied:
when you press the
Apply
button.
when you move to a different page in the Wizard.
when you exit the Wizard, except in the case when the
Cancel
button is pressed.
The Cancel button only discards changes made on the current screen.
It will not
undo all changes made in the Wizard
.
Summary of Contents for SL1100
Page 1: ...PC Programming Manual NDA 31205 Issue 3 01 SL1100...
Page 2: ......
Page 4: ......
Page 255: ......