NEC SL1000, Programming Manual

Page: 66 / 580

Program
11
m a r g o r P d e t a l e R n o it p ir c s e D e p y T l a i D s e p y T l a i D
2 Extension Number 11-02 : Extension Numbering on page 2-51
11-04 : Virtual Extension Numbering on page 2-52
11-07 : Department Group Pilot Numbers on page 2-53
3 Trunk Access Code 11-09-01 : Trunk Access Code
4 Special Trunk Access 11-09-02 : Trunk Access Code
5 Operator Access 20-17 : Operator Extension on page 2-165
6 F-Route Access 44-xx
9 Dial Extension Analyze 11-20 : Dial Extension Analyze Table on page 2-68
sume, for example, the site is a hotel that has room numbers from 100-399. To make extension numbers
from 100 to 399. (Other applications might also require you to change entries in Program 11-10 ~ 11-16.)
Default
See the following tables for default settings.
Table 2-1 System Numbering Default Settings
Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator
Access, 6=Flexible Routing, 9 = Dial Extension Analyze, 0=Not Used
e p y T l a i D d e ri u q e R s ti g i D f o r e b m u N d e l a i D
Default New Default New
2 3 X 1
0 0 1 1
0 0 2 1
0 0 3 1
0 0 4 1
0 0 5 1
0 0 6 1
0 0 7 1
0 0 8 1
0 0 9 1
0 0 0 1
1
*
0 0
0 0 # 1
2 3 X 2
0 0 1 2
0 0 2 2
0 0 3 2
0 0 4 2
0 0 5 2
0 0 6 2
0 0 7 2
0 0 8 2
Issue 0.1 SL1000
Program 11 : System Numbering
2-46
Changing the Dial Type for a range of codes can have a dramatic affect on how your system operates. As-
correspond to room numbers, you should use Program 11-02 to reassign extension numbers on each floor