NEC SILENTWRIT 1700 Series, Configuration Manual

Page: 91 / 196

NEC 1765 Administration Software for NetWare 5–3
5
N
EC
176
5 Ad
mi
n
ist
rati
on
S
o
ft
ware
NEC 1765 Administration Software
for NetWare
The NEC 1765 Administration software for NetWare
allows you to display and modify configuration
information for the NEC Silentwriter 1765. The next
section describes specific tasks and the steps to
complete them. For information about specific
windows, dialog boxes, and menu options see
page 5-14.
note:
Windows 3.1x users may encounter
difficulties with Windows resources while using NEC
1765 Administration software for NetWare. If your
Windows 3.1x system crashes frequently, try editing
your WIN.INI file. To verify that the problem is caused
by Windows resources, modify the WIN.INI file so that
both load and run commands are empty as shown
below. Comment out the original load and run
commands by typing a “;” in front of them.
load=
;load=nwpopup.exe stbvisn.exe
run=
;run=c:\SWRITER\wspd.exe
Then restart Windows. If that helps, experiment with
adding one load or run command at a time. You must
restart Windows each time the WIN.INI file is edited for
changes to take effect. If the problem persists, consider
upgrading to Windows 95.
Using NEC 1765 Administration Software
for NetWare
This section describes the steps to perform specific
network and printer configuration tasks with NEC 1765
Administration software for NetWare. Detailed
information about NEC 1765 Administration software
windows, dialog boxes, and menus begins on “NEC
1765 Printer Administration Window” on page 5-14.
Displaying Available Printers
You can display a list of available printers on the
network and sort and filter the list.
1.
Open the NEC 1765 Administration software.
2. The NEC 1765 Printer Administration window
displays a list of all printers on the network that are
configured to work with NEC 1765 software.
You can sort the list by printer name, MAC address, or
network number.
1.
Select the Sort menu from the Printer
Administration window menu bar.
2. Select the sort key from the menu.
You can also filter the list by network number.
1.
Select the Filter menu from the Printer
Administration window menu bar.
2. In the Network Number dialog box select the
network number of the printers you wish to display.
3. Click the OK button.