NEC RSC1812 Owner'S Manual Download Page 21

Page: 21 / 22

tin

Before you call for service...

tio

ain

• Have you made a

mistake in timer
operation?

• Has the fuse blown or

has the circuit breaker
been tripped?

• Check that this is not a

damp smell exuded by
the walls, carpet,
furniture, or cloth items
in the room.

• Condensation occurs

when the airflow from
the air conditioner cools
the warm room air.

NOTE

WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.

The indoor side is not water resistant and should not be exposed to excess water.

Check the following points before requesting repairs or service.... If the fault persists,
please contact your dealer or service center.

Does not operate.

The room has a
peculiar odor.

It seems that
condensation is leaking
from the air conditioner.

Air conditioner does not
operate for about 3
minutes when restarted.

Does not cool or heat

effectively.

The air conditioner

operation is noisy.

Remote control display

is faint, or no display

at all.

Crack sound is heard.

• Is the air filter dirty?

See air filter cleaning
instructions. (Refer to
page 18)

• The room may have

been very hot when the
room air conditioner
was first turned on.
Allow time for it to cool
down.

• Has the temperature

been set incorrectly?

• Are the indoor unit's air

inlet or outlet vents
obstructed?

• For a noise that sounds

like water flowing.

-This is the sound of

freon flowing inside the
air conditioner unit.

• For a noise that sounds

like the compressed air
releasing into
atmosphere.

-This is the sound of

the dehumidifying
water being processed
inside the air
conditioning unit.

• Are the batteries

depleted?

• Are the batteries

inserted in the opposite
(+) and (-) directions?

• This sound is

generated by the
expansion/contraction
of the front panel, etc.
due to changes of
temperature.

• This is the Protection

device of the air
conditioner .

• Wait about three

minutes and operation
will begin.

Troubleshooting Tips! Save time and money!

Summary of Contents for RSC1812























Search results

Summary of Contents for RSC1812

Reviews:

Related manuals for RSC1812

Brands by name

Popular brands

NEC RSC1812, Owner'S Manual

Search results

Summary of Contents for RSC1812

Reviews:

Related manuals for RSC1812

Brands by name

Popular brands