SMART
SLEEP
SUPER
Each time
button is pressed, the operation mode
is changed in sequence:
MODE
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
18
~32
Heating mode is NOT available for cooling only air conditioner.
HEATING
COOLING
DRY
FAN ONLY
Selecting mode
FAN mode
2
+
-
Auto
High
Medium
Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, airflow is set at "Low" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to
temperature setting by 1
lower
℃
Press once to
temperature setting by 1
raise
℃
Range of available set temperature
*HEATING, COOLING
DRY
FAN
unable to set
room temperature
Turning on
SWING, SMART, TIMER, SLEEP and SUPER operation modes will be specified in the following pages.
Press
button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2
5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
－
1
3
4
2
ONLY
Operation instructions
7
Operation modes
*Note: Heating mode is NOT available for cooling only models.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
