96 System specifications
On the back of the CD-ROM reader are two 6-pin jumper blocks
(jumper A and jumper B). The jumper A block is factory set with the
pins open, as shown in the following table.
CD-ROM reader jumper block A settings
PIN
SETTING
SIGNAL
1
Disabled (open)
–
2
Disabled (open)
Factory use only
3
Disabled (open)
Factory use only
The jumper B block sets functions cable select (CSEL), slave (SL),
and master (MA). The following table summarizes the factory set
jumper settings.
CD-ROM reader jumper block B settings
PIN
SETTING
SIGNAL
1
Disabled (open)
CSEL (cable select)
2
Disabled (open)
SL (slave)
3
Enabled (open)
Master (default setting)